Setting Up an Automatic Litter Box: Match the Model Before Powering On

PetSafe's SmartSpin age advice requires leaving it unplugged until the cat is six months old.

Its Simply Clean setup guide separately leaves the unit unplugged for kittens younger than six months.

Whisker's LR4 automatic-mode minimum is 3 lb. That weight rule does not replace another model's age restriction.

SmartSpin's setup guide installs legs, bracket and lined drawer; keep the liner clear of sensors. Assemble the labeled sphere parts and cover in the documented order, retaining the alignment tool. Loosely insert all eight sphere screws in a star pattern before tightening by hand. The back latch must align even if it appears to lock. With nothing inside, power on and await the self-check until the sphere returns to its starting position. Lightly hold Cleaning three seconds for A/Add Litter Mode, fill to MAX, then press/release to exit. Confirm its compatible litter type with the manual or maker before loading; this page only says high-quality litter.

Simply Clean's guide joins bowl/base, guard and conveyor in its written order. Connect the red conveyor cable as directed before securing the conveyor and cover. Line and seat the waste bin; its carbon filter's white face points toward the cover. Fill with clumping, scoopable clay litter to MAX, excluding litter containing baking soda. Then connect the power adapter. The guide describes a green indicator and immediate bowl rotation.

LR4 arrives assembled. Use a firm, level, cool/dry location without pushing it against a wall or into a corner. Wrap the liner over the drawer perimeter and push the bag into its bottom. Spread compatible clumping litter slightly below the raised fill line. Connect supplied power and press/release Power. Power-on begins a clean cycle; blue-ready does not mean nothing will move.